Flower Pedals Sunflower Deluxe — MIDI Editor & CC Reference

MIDI control for the Flower Pedals Sunflower Deluxe stereo harmonic tremolo — speed, depth, shape, harmonic width, ramping, drift and 5 presets.

Explore the Sunflower Deluxe controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 10. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
BOOSTCC 17Set boost level for the output of the pedal
DEPTHCC 15Set the depth of the tremolo
SPEEDCC 14Set the primary speed of the tremolo
SHAPECC 16Set the shape of the tremolo waveform. Wave shape is continuously variable and dependent on the position of the Shape switch (triangle, sin, or random)
WIDTHCC 19Set the distance between the high and low harmonic waveforms. Set the knob all the way to the left for standard tremolo, and all the way to the right for full harmonic tremolo
DRIFT SPEEDCC 24Speed secondary — set the speed at which the drift happens
DRIFT DEPTHCC 25Depth secondary — set how far the speed drifts from the primary speed

Alt / Secondary Knob Functions

ControlMIDI CCDescription
RAMP SPEEDCC 21Depth secondary — set the rate at which the ramping happens
SECONDARY SPEEDCC 20Speed secondary — set the secondary speed which the pedal ramps to in ramping modes
STEREO WIDTHCC 22Width secondary — set the distance between the left and right tremolo wave. Set the knob all the way to the left for them to be in sync, and all the way to the right to be completely seperate

Switches

SwitchMIDI CCPositions
DIVCC 181/2 / 1/4 / Dotted 1/8 / 1/8 / Triplet 1/8
HARMONIC DIVCC 231/2 / 1/4 / Dotted 1/8 / 1/8 / Triplet 1/8
SHAPECC 26Triangle / Sin / Rand
RAMPCC 27Latch / Moment / Drift
DRIFT SHAPECC 28Triangle / Sin / Rand

Footswitches

  • ONCC 32
  • TAPCC 31

Special MIDI Functions

  • Expression — CC 34
  • Ramp Engage — CC 31. Engages the ramp to the secondary speed (on), or ramps back to the primary speed (off).
  • Pedal Engage — CC 32. Engages (on) or disengages (off) the pedal outright, independent of the On/Hold footswitch toggle.
  • Ignore MIDI Clock — CC 33. When on, the pedal ignores incoming MIDI clock. When off, the pedal syncs to the MIDI clock signal.
  • Tempo (BPM) — CC 29. Sets the tempo to this value in BPM (1-127).
  • Tempo x2 (BPM) — CC 30. Sets the tempo to twice this value in BPM — use for tempos above 127 BPM.
  • Expression — CC 34. Sweeps between the stored heel and toe settings and also engages the expression preset. Every knob parameter except Division follows expression.

Hardware Presets

Sunflower Deluxe has 5 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.