Jackson Audio Bloom V2 — MIDI Editor & CC Reference
MIDI control for the Jackson Audio Bloom V2 — six optical compression modes over Program Change, plus compressor, EQ and boost circuit switching.
Explore the Bloom V2 controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.
Knobs
| Control | MIDI CC | Description |
|---|---|---|
| VOLUME | Not MIDI-controlled | Master level for the compressor. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. Set it by hand on the pedal. |
| BLEND | Not MIDI-controlled | Balances compressed vs. clean signal. Blending clean signal back in gives natural attack with extended sustain. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. |
| COMP | Not MIDI-controlled | Compression intensity. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. |
| BASS | Not MIDI-controlled | ±12 dB around a 12:00 center detent. Centre (64) is flat. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. |
| MIDDLE | Not MIDI-controlled | ±12 dB around a 12:00 center detent. Centre (64) is flat. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. |
| TREBLE | Not MIDI-controlled | ±12 dB around a 12:00 center detent. Centre (64) is flat. NOTE: analog knob — the manual documents no MIDI CC, so this cannot be set over MIDI. |
| BLOOM | Not MIDI-controlled | Sets boost level and fade time. NOTE: analog knob — the manual documents no MIDI CC. Boost level CAN be driven over MIDI instead, by switching midiBoostMode to MIDI and using midiBoostLevel (CC 5). |
| BOOST LEVEL | CC 5 | midiBoost expression level (CC 5, 0-127). Only in control of the boost circuit when midiBoostMode (CC 4) is set to MIDI — otherwise the physical BLOOM knob stays in charge of boost level. |
Switches
| Switch | MIDI CC | Positions |
|---|---|---|
| EQ | CC 2 | Off / On |
| BOOST SOURCE | CC 4 | Knob / MIDI |
Footswitches
- COMP — CC 1
- BLOOM — CC 3
Hardware Presets
Bloom V2 has 6 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.