Meris Polymoon — MIDI Editor & CC Reference

Control the Meris Polymoon from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.

Explore the Polymoon controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
TIMECC 16Delay time
FEEDBACKCC 17Delay feedback amount
MIXCC 18Balance between dry and wet signal
MULTIPLYCC 19Cascading delay multiplication — adds rhythmic complexity
DIMENSIONCC 20Stereo spread and spatial depth of the delay
DYNAMICSCC 21Envelope-controlled filtering that responds to playing dynamics

Alt / Secondary Knob Functions

ControlMIDI CCDescription
EARLY MODCC 22Early reflection modulation amount
FB FILTERCC 23Tone filtering applied to feedback path
DELAY LVLCC 24Output level of the delay signal
LATE MODCC 25Modulation applied to later delay taps
FLANGER MODECC 26Selects the dynamic flanger voicing
FLANGER SPEEDCC 27Speed of the dynamic flanger effect

Switches

SwitchMIDI CCPositions
DOTTED 8THCC 91/4 Note / Dotted 8th
PHASER MODECC 29Off / Slow / Whole Note / 1/4 Note
HALF SPEEDCC 31Full / Half

Footswitches

  • TAPCC 28
  • BYPASSCC 14

Special MIDI Functions

  • Tap Tempo — CC 28
  • Expression — CC 4
  • Bypass — CC 14. When on, the effect is bypassed (dry signal only). When off, the effect is engaged. Per Meris spec: 0–63 = FX bypass, 64–127 = FX enabled.
  • Tempo — CC 15. Sets the delay time directly in 10 ms increments (0 = 0 ms, 120 = 1200 ms). Use instead of tap tempo for precise delay time control via MIDI.

Hardware Presets

Polymoon has 16 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.

More Meris Pedals on Nitelite