Control the Source Audio Nemesis Delay ADT from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.
Explore the Nemesis Delay ADT controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.
Knobs
Control
MIDI CC
Description
TIME
CC 2
Delay time as a ratio of maximum delay time. Non-linear mapping between minimum and maximum values. Ranges vary by engine (e.g., Digital: 10ms-2.6s, Analog: 40ms-1.2s, Slapback: 20ms-220ms).
MIX
CC 6
Wet/dry mix. 0 = 100% dry, 63 = 50/50, 127 = 100% wet. Controls the balance between your dry signal and the delayed signal.
FEEDBACK
CC 5
Amount of wet signal fed back into the delay line. Controls the number of repeats. 0 = one repeat, 127 = maximum feedback. Some engines allow self-oscillation at high settings.
MOD
CC 7
Modulation depth (LFO). Usually controls time (pitch) modulation for vibrato and chorus effects. For some engines, controls tape modulation, filter modulation, or tremolo depth.
RATE
CC 8
Modulation speed. For most engines: 0 = 0.1 Hz, 127 = 10 Hz. For tape-style engines: controls tape speed (wow and flutter rate). Center position is a typical vintage tape speed.
INTENSITY
CC 9
Engine-specific parameter that changes the color and character of the delay. Functions vary by engine: filtering, diffusion, distortion, rhythm selection, pitch shift interval, tremolo depth, and more.