Universal Audio Dream '65 — MIDI Editor & CC Reference

Control the Universal Audio Dream '65 from your browser — full MIDI CC reference for 8 parameters, interactive editor, and AI-generated presets. Free, no install.

Nitelite gives the Dream '65 a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 1). Works free in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
VOLUMECC 22Amp gain. As volume increases, the amp becomes more overdriven and compressed. Output is auto-compensated as the knob is raised.
REVERBCC 51Amount of the amp's tube-driven spring reverb. The reverb becomes less prominent as the amp compresses and saturates at higher Volume and Boost settings.
OUTPUTCC 7Post-amp output level. At noon, running direct or into other pedals, level is roughly the same as bypassed volume. Not available on the original amp.
BASSCC 31Low frequency response of the amp's tone stack.
TREBLECC 33High frequency response of the amp's tone stack.
BOOSTCC 41Boost amount. 0 (OFF) disables the boost circuit entirely. Character depends on the Mod switch: Lead adds OD Special mid-boost, Stock adds clean gain, D-Tex adds SRV-style preamp gain.

Alt / Secondary Knob Functions

ControlMIDI CCDescription
SPEEDCC 61Vibrato rate (ALT mode on the Treble knob). Unavailable when Mod is set to D-Tex and Boost is not set to OFF.
INTENSITYCC 62Vibrato intensity (ALT mode on the Boost knob). 0 bypasses the vibrato circuit. Unavailable when Mod is set to D-Tex and Boost is not set to OFF.

Switches

SwitchMIDI CCPositions
SPEAKERCC 18GB25 / Oxford / EV12 / Boutique D65 / S-Verb / JBF120 / No Cab
MODCC 17Lead / Stock / D-Tex

Footswitches

  • ONbypass on CC 12
  • PRESETbypass on CC 13

Special MIDI Functions

  • Reverb Enable — CC 50. Toggles the reverb circuit on/off independent of the Reverb knob position.
  • Boost Enable — CC 40. Toggles the boost circuit on/off independent of the Boost knob position.
  • Vibrato Enable — CC 60. Toggles the vibrato circuit on/off. Vibrato is unavailable when Mod is set to D-Tex and Boost is not OFF.
  • Speaker Up — CC 14. Cycles the Speaker switch up through the cab list (momentary).
  • Speaker Down — CC 15. Cycles the Speaker switch down through the cab list (momentary).
  • Store Preset (Hold) — CC 16. Emulates holding the ALT/AMP/STORE switch. Sends value 1 to save the current Live-mode settings to the currently selected preset slot.

Hardware Presets

The Dream '65 has 128 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.

More Universal Audio Pedals on Nitelite