Strymon blueSky V2 — MIDI Editor & CC Reference

Control the Strymon blueSky V2 from your browser — full MIDI CC reference for 8 parameters, interactive editor, and AI-generated presets. Free, no install.

Nitelite gives the blueSky V2 a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 1). Works free in Chrome, Edge, Opera, or Brave — no install required.

Knobs

Control	MIDI CC	Description
DECAY	CC 12	Duration of the reverberated signal's decay
MIX	CC 16	Wet/dry mix — full dry at minimum, 50/50 at ~3 o'clock, full wet at maximum
LOW	CC 13	Low frequency content within the reverb decay trail — damped low end at minimum, no damping at maximum
HIGH	CC 17	High frequency content within the reverb — damped high end at minimum, no damping at maximum
PRE-DELAY	CC 14	Time before the reverberated signal appears — essential for creating accurate and pleasing reverb
SHIMMER	CC 18	Pitch-shifted embellishment that varies by verb type: Plate=regenerative octave-up, Room=octave plus fifth, Spring=octave-down with pulsing tremolo

Switches

Switch	MIDI CC	Positions
VERB	CC 11	Plate / Room / Spring
MOD	CC 15	Off / Light / Deep

Footswitches

FAV — bypass on CC 102
ON — bypass on CC 102

Special MIDI Functions

Expression — CC 100
MIDI Expression — CC 60. When enabled, blueSky responds to MIDI Expression CC #100 (values 0=heel to 127=toe) to control knob settings in the same manner as a TRS expression pedal. Saved per preset.
MIDI Clock Sync — CC 63. Enables or disables MIDI Clock sync on blueSky. Send value 0 to turn off, any value 1-127 to turn on.

Hardware Presets

The blueSky V2 has 300 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.