Strymon Flint V2 — MIDI Editor & CC Reference

Control the Strymon Flint V2 from your browser — full MIDI CC reference for 7 parameters, interactive editor, and AI-generated presets. Free, no install.

Nitelite gives the Flint V2 a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 1). Works free in Chrome, Edge, Opera, or Brave — no install required.

Knobs

Control	MIDI CC	Description
INTENSITY	CC 12	Tremolo depth — varies the LFO amplitude. At minimum the LFO is off.
MIX	CC 18	Reverb wet/dry mix. 50/50 is at the 3 o'clock position.
SPEED	CC 13	Tremolo LFO frequency from slow to fast. Extended slow range beyond vintage offerings.
DECAY	CC 20	Reverb decay duration. '70s and '80s approach infinite decay at maximum.
COLOR	CC 19	Reverb tone — darker at low settings, brighter at high settings. Critical for amp matching.

Alt / Secondary Knob Functions

Control	MIDI CC	Description
TREMOLO BOOST/CUT	CC 15	Volume boost or cut when tremolo is on (-3dB cut to +3dB boost, unity at noon/64)
REVERB BOOST/CUT	CC 22	Volume boost or cut when reverb is on (-3dB cut to +3dB boost, unity at noon/64)
TAP DIVISION	CC 14	Tap tempo note subdivision (1/16, Triplet, 1/8, 1/4). Default is 1/4 note.
EFFECT ORDER	CC 23	Signal routing order (0=Reverb>Tremolo, 1-127=Tremolo>Reverb). Default is Reverb into Tremolo.
PRE-DELAY	CC 21	Time between dry signal and reverb onset. Longer times add space and clarity.

Switches

Switch	MIDI CC	Positions
TREMOLO	CC 11	'61 harm / '63 tube / '65 photo
REVERB	CC 17	'60s / '70s / '80s

Footswitches

TREMOLO ON — bypass on CC 27
REVERB ON — bypass on CC 28

Special MIDI Functions

Expression — CC 100
TREMOLO ON/OFF — CC 10. Enables or disables the tremolo effect independently of the footswitch.
REVERB ON/OFF — CC 16. Enables or disables the reverb effect independently of the footswitch.
BYPASS BOTH (A & B) — CC 33. Bypasses both tremolo and reverb simultaneously. 0=bypass, 127=on.
MIDI EXPRESSION ON/OFF — CC 60. Enables or disables the MIDI expression pedal input. When off, the EXP/MIDI jack behaves according to its jack mode setting.
MIDI CLOCK SYNC ON/OFF — CC 63. Enables or disables MIDI clock sync for tremolo speed. When on, incoming MIDI clock overrides the SPEED knob.
MIDI CLOCK DIVISION — CC 25. Sets the note subdivision used when syncing tremolo speed to incoming MIDI clock. 0=x1/4, 1=x1/3, 2=x1/2, 3=x1, 4=x2, 5=x3, 6=x4.

Hardware Presets

The Flint V2 has 300 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.