Strymon Cloudburst — MIDI Editor & CC Reference
Control the Strymon Cloudburst from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.
Explore the Cloudburst controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.
Knobs
| Control | MIDI CC | Description |
|---|---|---|
| DECAY | CC 12 | Reverb decay time, from very short to over 50 seconds |
| MIX | CC 16 | Wet/dry mix. Full dry at minimum, full wet at maximum. 50/50 at approximately 3 o'clock |
| PRE-DELAY | CC 13 | Time before reverb onset. Use lower Mix settings when using higher Pre-Delay |
| TONE | CC 14 | High-end content of the reverb. Lower = darker/warmer, higher = brighter/crisper |
| MOD | CC 15 | Modulation depth applied to the reverb. Off at minimum, wide range of modulation intensity |
Switches
| Switch | MIDI CC | Positions |
|---|---|---|
| ENSEMBLE | CC 11 | Off / mp / forte |
Footswitches
- BYPASS — CC 102
Special MIDI Functions
- Expression — CC 100
- MIDI Expression — CC 60. Enables or disables MIDI expression control. When on, expression pedal CC messages control the assigned parameter. Default is On.
- Ensemble mp Level — CC 17. Adjusts the output level of the Ensemble effect when set to the mp (mezzo piano) position. Allows fine-tuning relative volume between Ensemble settings.
- Freeze — CC 97. Freezes the current reverb tail, holding it indefinitely. Send 0 to release.
- Infinite — CC 98. Engages Infinite mode, sustaining the reverb indefinitely with full input mix. Send 0 to release.
Hardware Presets
Cloudburst has 300 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.