Strymon Brig — MIDI Editor & CC Reference
Control the Strymon Brig from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.
Explore the Brig controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.
Knobs
| Control | MIDI CC | Description |
|---|---|---|
| TIME | CC 12 | Delay time — range depends on selected Voice mode |
| MIX | CC 16 | Wet/dry mix — 50/50 at approximately 3 o'clock |
| FILTER | CC 13 | EQ, noise, and bucket loss of repeats based on Voice |
| REPEATS | CC 14 | Number of delay repeats — 3 o'clock for sustained infinite repeats without runaway |
| MOD | CC 15 | LFO modulation on delay time — first half slow, second half fast and intensifying |
Switches
| Switch | MIDI CC | Positions |
|---|---|---|
| VOICE | CC 11 | 3205 / 3005 / multi |
| TAP DIVISION | CC 17 | Triplet / Eighth / Dotted 8th / Quarter |
Footswitches
- BYPASS — CC 102
Special MIDI Functions
- Expression — CC 100
- Infinite Repeats — CC 97. Holds delay repeats at infinite feedback while active. Send 127 to engage, 0 to release. Equivalent to holding the physical footswitch.
- Bank Select — CC 0. Selects the active MIDI preset bank. Bank 0 = presets 0–127, Bank 1 = presets 128–255, Bank 2 = presets 256–299. Send before a Program Change to access the target bank.
- Footswitch — CC 27. Simulates a press and release of the physical footswitch via MIDI. Toggles bypass on/off.
Hardware Presets
Brig has 300 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.