Strymon DIG V2 — MIDI Editor & CC Reference

Control the Strymon DIG V2 from your browser — full MIDI CC reference for 12 parameters, interactive editor, and AI-generated presets. Free, no install.

Nitelite gives the DIG V2 a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 1). Works free in Chrome, Edge, Opera, or Brave — no install required.

Knobs

Control	MIDI CC	Description
TIME	CC 12	Delay 1 time — acts as master time control for both delays (20ms–1.6s)
MIX	CC 16	Wet/dry mix for Delay 1 — 50/50 at 3 o'clock position
TIME 2	CC 13	Delay 2 time — rhythmic subdivision relationship in Sync mode, or independent time in Free mode
TONE	CC 14	Feedback filter response — counter-clockwise for high cut, clockwise for low cut, noon for flat
REPEATS	CC 18	Number of repeats for both delays
MIX 2	CC 17	Wet/dry mix for Delay 2 — 50/50 at 3 o'clock position

Switches

Switch	MIDI CC	Positions
MOD	CC 11	Off / Light / Deep
TYPE	CC 15	24/96 / ADM / 12 Bit
CONFIG	CC 22	Series / Ping Pong / Parallel
SYNC/FREE	CC 21	Sync / Free
DELAY 1 SUBDIVISION	CC 19	Dotted 8th / Quarter / Half
DELAY 2 REPEATS	CC 20	Independent / Track

Footswitches

TAP — bypass on CC 93
ON — bypass on CC 102

Special MIDI Functions

Expression — CC 100
MIDI Expression — CC 60. Enables or disables MIDI expression control via CC 100. When on, the expression pedal position is controlled by CC 100 (0=heel, 127=toe). Default: On.
MIDI Clock Sync — CC 63. Enables or disables MIDI clock sync. When on, DIG locks the delay time to incoming MIDI clock, and the MIDI Clock Tempo Mult/Div setting determines the rhythmic relationship. Default: Off.
Circular Repeats — CC 97. Activates the Circular Repeats (hold) effect. When on (127), repeats build and sustain indefinitely. When off (0), normal decay resumes.
Dry Level — CC 23. Controls the dry signal level. Values 0-126 set an explicit dry level (0 = no dry signal, 126 = unity gain with input). Value 127 = Track Mix, where wet/dry balance is adjusted via the MIX and MIX 2 knobs.
MIDI Clock Tempo Mult/Div — CC 25. Sets the MIDI clock tempo multiplier or divider relationship. 0=x4, 1=x3, 2=x2, 3=x1 (default), 4=1/2, 5=1/3, 6=1/4.

Hardware Presets

The DIG V2 has 300 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.