Strymon El Capistan V2 — MIDI Editor & CC Reference

Control the Strymon El Capistan V2 from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.

Explore the El Capistan V2 controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 1. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
TIMECC 12Delay time — behavior depends on Tape Head type
TAPE AGECC 14Tape bandwidth/wear — min for fresh tape, max for dark worn tape
MIXCC 16Dry/wet balance — 50/50 at 3 o'clock position
REPEATSCC 18Number of echo repeats — from one to saturated oscillation
WOW & FLUTTERCC 13Tape speed fluctuations — min for pristine, max for a machine needing service
SPRINGCC 17Level of integrated spring reverb

Alt / Secondary Knob Functions

ControlMIDI CCDescription
LOW END CONTOURCC 19Low frequency shaping of echo repeats
BOOST/CUTCC 22Output level boost or cut (+/- 3dB) when engaged — unity at noon
TAPE BIASCC 20Tape machine bias — lower is cleaner, higher is dirtier with limited headroom
TAPE CRINKLECC 21Tape irregularities — friction, creases, splices, contaminants

Switches

SwitchMIDI CCPositions
TAPE HEADCC 11Fixed / Multi / Single
MODECC 15A / B / C

Footswitches

  • TAPCC 93, hold: CC 97
  • ONCC 102

Special MIDI Functions

  • Tap Tempo — CC 93
  • Expression — CC 100
  • MIDI Clock Sync — CC 63. Enable or disable MIDI clock sync. When on, delay time is locked to incoming MIDI clock tempo.
  • MIDI Expression — CC 60. Enable or disable MIDI expression control. When on, CC 100 (expression pedal) is active.
  • MIDI Clock Tempo Mult/Div — CC 25. Multiply or divide the incoming MIDI clock tempo. 0=x4, 1=x3, 2=x2, 3=x1 (unity), 4=1/2, 5=1/3, 6=1/4.
  • Infinite Repeats — CC 97. Hold to latch repeats into self-oscillation; release to return to normal decay. Send 127 to hold, 0 to release.
  • Footswitch A (MultiSwitch Plus) — CC 27. Triggers MultiSwitch Plus footswitch A remotely via MIDI. Send 127 to press, 0 to release.
  • Footswitch B (MultiSwitch Plus) — CC 28. Triggers MultiSwitch Plus footswitch B remotely via MIDI. Send 127 to press, 0 to release.

Hardware Presets

El Capistan V2 has 300 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.

More Strymon Pedals on Nitelite