Chase Bliss Bliss Factory — MIDI Editor & CC Reference

Control the Chase Bliss Bliss Factory from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.

Explore the Bliss Factory controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 2. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.

Knobs

Control	MIDI CC	Description
VOLUME	CC 14	Output level
GATE	CC 15	Gate control. Right = eliminates squeals/hiss. Left = opens gate. Controls ramp speed when ramping is engaged.
COMP	CC 16	Attack characteristic (left) to soft (right), pinches tone at max. Tunes fat feedback fuzz.
DRIVE	CC 17	Distortion amount. Adjusts feedback pitch and tonal thickness.
STAB	CC 18	Stability. Full right = classic fuzz. Turn left for soft/squishy fuzz and self-oscillation.
LPF	CC 19	Low pass filter cutoff. Fully CW = open. CCW removes high frequencies.

Switches

Switch	MIDI CC	Positions
AUX FUNC	CC 21	STAB / LPF / GATE
FAT	CC 22	NORM / FAT / FATTER
LPF TYPE	CC 23	1-POLE / 2-POLE / 2P RES

DIP Switches — CONTROL

Control	MIDI CC	Description
VOLUME	CC 61	Enable ramping/expression control for VOLUME knob
DRIVE	CC 62	Enable ramping/expression control for DRIVE knob
STAB	CC 63	Enable ramping/expression control for STAB knob
COMP	CC 64	Enable ramping/expression control for COMP knob
LPF	CC 65	Enable ramping/expression control for LPF knob
BOUNCE	CC 66	Bounce mode: parameters modulate back and forth instead of ramp-and-hold
SWEEP	CC 67	Sweep direction: Top (T, knob=max) or Bottom (B, knob=min)
SHAPE	CC 68	Ramp waveform: triangular/linear (off) or square (on)

DIP Switches — CUSTOMIZE

Control	MIDI CC	Description
VOLUME	CC 71	Rise/fall direction for VOLUME expression/ramping
DRIVE	CC 72	Rise/fall direction for DRIVE expression/ramping
STAB	CC 73	Rise/fall direction for STAB expression/ramping
COMP	CC 74	Rise/fall direction for COMP expression/ramping
LPF	CC 75	Rise/fall direction for LPF expression/ramping
MOTAUX	CC 76	Momentary engage/bypass for AUX stomp
MOTBYP	CC 77	Momentary engage/bypass for BYPASS stomp
AUXPOL	CC 78	AUX polarity: Up = knob-to-max, Down = max-to-knob

Footswitches

AUX — CC 101
BYPASS — CC 102

Special MIDI Functions

Expression — CC 100

Hardware Presets

Bliss Factory has 122 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.