Chase Bliss REVERSE MODE C — MIDI Editor & CC Reference
Control the Chase Bliss REVERSE MODE C from your browser — full MIDI CC reference for 9 parameters, interactive editor, and AI-generated presets. Free, no install.
Nitelite gives the REVERSE MODE C a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 2). Works free in Chrome, Edge, Opera, or Brave — no install required.
Knobs
Control
MIDI CC
Description
TIME
CC 14
Global delay time. Max 4.19s (8.38s at half sample rate).
MIX
CC 15
Input/effect blend. Controls ramp speed when ramping is engaged.
FEEDBACK
CC 16
Number of echoes. Max gives stable infinite build-up.
OFFSET
CC 17
Splits three voices apart, giving each a different delay time linked to TIME.
BALANCE
CC 18
Volume balance of three voices. Left half isolates/blends, right half shifts levels.
FILTER
CC 19
High-pass (CW) or low-pass (CCW) filtering on echoes. Noon = flat.
Ramping waveform: Triangle/Square/Sine/Random/Smooth Random
MOD DEPTH
CC 27
Modulation depth
MOD RATE
CC 28
Modulation rate (when in FREE mode)
Switches
Switch
MIDI CC
Positions
MOD CTRL
CC 21
SYNC / OFF / FREE
MOD TYPE
CC 22
VIB / TREM / FREQ
SEQUENCE
CC 23
RUN / OFF / ENV
DIP Switches — CONTROL
Control
MIDI CC
Description
TIME
CC 61
Enable ramping/expression control for TIME knob
OFFSET
CC 62
Enable ramping/expression control for OFFSET knob
BALANCE
CC 63
Enable ramping/expression control for BALANCE knob
FILTER
CC 64
Enable ramping/expression control for FILTER knob
FEED
CC 65
Enable ramping/expression control for FEEDBACK knob
BOUNCE
CC 66
Ramp mode (off, one-shot) vs Bounce mode (on, continuous LFO)
SWEEP
CC 67
Sweep direction: Bottom (B, knob=min) or Top (T, knob=max)
POLARITY
CC 68
Ramp polarity: Forward (F) or Reverse (R)
DIP Switches — CUSTOMIZE
Control
MIDI CC
Description
SWAP
CC 71
Swap voice order
MISO
CC 72
Mono In, Stereo Out
SPREAD
CC 73
Stereo spread processing
TRAILS
CC 74
Wet signal fades after bypass instead of cutting off
LATCH
CC 75
Changes hold functions from momentary to latching
FEED TYPE
CC 76
Alternate feedback type
FADE TYPE
CC 77
Alternate fade type
MOD TYPE
CC 78
Alternate modulation type
Footswitches
TAP — bypass on CC 103, hold on CC 105
BYPASS — bypass on CC 102, hold on CC 106
Special MIDI Functions
Tap Tempo — CC 93
Expression — CC 100
MIDI Clock Sync — CC 51. Controls whether Reverse Mode C follows incoming MIDI clock. When on, TIME syncs to external MIDI clock; when off, clock is ignored and TIME is set manually or via tap tempo.
Ramp/Bounce — CC 52. Enables or disables the ramp/bounce movement globally for parameters assigned in the CONTROL DIP bank.
Dry Kill — CC 57. Removes the dry signal from the output, passing only the wet effect signal. Useful in parallel effects loops.
Sequence Spacing — CC 33. Sets how the sequencer moves between voices. REST (off) adds a gap/pause between voice transitions; SKIP (on) moves immediately to the next voice.
ALT Menu — CC 104. Enters or exits the ALT secondary parameter menu, equivalent to holding both footswitches on the pedal.
Freeze — CC 105. Freezes the delay buffer, creating an infinite sustain of whatever is in the buffer. Equivalent to holding the left (TAP) footswitch.
Half Speed — CC 106. Halves the sample rate, doubling delay time and lowering pitch by one octave. Equivalent to holding the right (BYPASS) footswitch.
Ramp Speed — CC 20. Sets the speed of the ramp/bounce LFO when one or more knobs are assigned in the CONTROL DIP bank.
Octave Type — CC 31. Selects which octave voice is active. 0–1 = Oct Down, 2 = Both Oct (up and down), 3+ = Oct Up.
Factory Reset — CC 56. Resets all settings and presets to factory defaults. This will erase all saved presets.
Hardware Presets
The REVERSE MODE C has 122 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.