Chase Bliss TONAL RECALL — MIDI Editor & CC Reference
Control the Chase Bliss TONAL RECALL from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.
Explore the TONAL RECALL controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 2. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.
Knobs
Control
MIDI CC
Description
TONE
CC 14
Low-pass tone filter for repeats. CW = brighter, CCW = very dark. Controls ramp speed when ramping is engaged.
LFO rate for pitch modulation on repeats. CW = fast, CCW = slow.
TIME
CC 17
Delay time. CW = longer (max 550ms). Overridden by tap tempo.
REGEN
CC 18
Repeats. Can self-oscillate. Long regen devolves into smeary tape-saturated blur.
DEPTH
CC 19
Intensity of pitch modulation on repeats.
Switches
Switch
MIDI CC
Positions
NOTE DIV
CC 21
1/4 / 1/8D / 1/8
CHIP MODE
CC 21
S / L / B
WAVE
CC 21
TRI / SINE / SQR
DIP Switches — CONTROL
Control
MIDI CC
Description
MIX
CC 61
Enable ramping/expression control for MIX knob
RATE
CC 62
Enable ramping/expression control for RATE knob
TIME
CC 63
Enable ramping/expression control for TIME knob
REGEN
CC 64
Enable ramping/expression control for REGEN knob
DEPTH
CC 65
Enable ramping/expression control for DEPTH knob
BOUNCE
CC 66
Ramp mode (off, one-shot) vs Bounce mode (on, back-and-forth modulation)
SWEEP
CC 67
Sweep direction: Top (T, knob=max) or Bottom (B, knob=min)
TRAILS
CC 68
True bypass (off) or Buffered bypass with trails (on)
DIP Switches — CUSTOMIZE
Control
MIDI CC
Description
RISE (MX)
CC 71
Rise direction for MIX ramp/expression
RISE (RT)
CC 72
Rise direction for RATE ramp/expression
RISE (TM)
CC 73
Rise direction for TIME ramp/expression
RISE (RG)
CC 74
Rise direction for REGEN ramp/expression
RISE (DP)
CC 75
Rise direction for DEPTH ramp/expression
MOTBYP
CC 76
Momentary-to-bypass: pedal only active when bypass stomp is pressed
TAP CTRL
CC 77
Tap controls: R = ramp timing, P = delay parameter
TAP DIV
CC 78
Tap division bank: off = standard, on = alternate (triplet/sextolet). Also selects MIDI note divisions.
Footswitches
TAP — CC 102
BYPASS — CC 102
Special MIDI Functions
Tap Tempo — CC 93
Expression — CC 100
MIDI Clock — CC 51. Whether the pedal listens to incoming MIDI Clock (beat clock) messages for tempo sync. When off, the pedal ignores MIDI Clock.
Ramp — CC 20. Controls the ramp time — how long it takes the selected parameter(s) to travel from one extreme to the other during a ramp sweep. 0 = fastest, 127 = slowest.
Hardware Presets
TONAL RECALL has 122 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.