Chase Bliss Generation Loss — MIDI Editor & CC Reference

Control the Chase Bliss Generation Loss from your browser — MIDI control reference, interactive editor, and AI-generated presets. Free, no install.

Explore the Generation Loss controls in your browser and connect compatible MIDI hardware to send settings to your pedal. The reference below shows the controls mapped in Nitelite; available functions depend on the pedal and firmware. The default MIDI channel in Nitelite is 2. Browser MIDI control works in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
WOWCC 14Low frequency pitch fluctuation depth/speed. Random vibrato and chorus.
WETCC 15Wet signal level. When ramping engaged, controls ramp time.
HPCC 16High-pass filter cutoff. CW = more filtering (brightening effect).
FLUTTERCC 17Fast random pitch fluctuations. Timbral tape sound.
GENCC 18Sample rate of wet signal. Max = pristine, CCW = degraded.
LPCC 19Low-pass filter cutoff. CCW = more filtering.

Switches

SwitchMIDI CCPositions
AUX FUNCCC 21MOD / GEN / FILTER
DRYCC 22NONE / SMALL / UNITY
HISSCC 23NONE / MED / HIGH

DIP Switches — RAMP / EXPRESSION

ControlMIDI CCDescription
WOWCC 61Enable ramping/expression control for WOW knob
HPCC 62Enable ramping/expression control for HP knob
FLUTTERCC 63Enable ramping/expression control for FLUTTER knob
GENCC 64Enable ramping/expression control for GEN knob
LPCC 65Enable ramping/expression control for LP knob
BOUNCECC 66Bounce mode (continuous modulation) vs Ramp (one-shot)
SWEEPCC 67Sweep direction: Bottom (B, knob=min) or Top (T, knob=max)
BUFFERCC 68Enables buffered bypass

DIP Switches — CUSTOMIZE

ControlMIDI CCDescription
WOWCC 71Rise/Fall direction for WOW
HPCC 72Rise/Fall direction for HP
FLUTTERCC 73Rise/Fall direction for FLUTTER
GENCC 74Rise/Fall direction for GEN
LPCC 75Rise/Fall direction for LP
MOTAUXCC 76Momentary engage/bypass for AUX stomp
MOTBYPCC 77Momentary engage/bypass for pedal bypass
SHAPECC 78Ramping waveform: triangular/linear (off) or square (on)

Footswitches

  • AUXCC 103
  • BYPASSCC 102

Special MIDI Functions

  • Expression — CC 100
  • AUX FUNC Engage — CC 101. Engage or bypass the AUX FUNC independently via MIDI. On = AUX FUNC engaged (CC 127). Off = AUX FUNC bypassed (CC 0).

Hardware Presets

Generation Loss has 122 hardware preset slots, recalled using MIDI Program Change. Saving requires an action on the pedal; follow the hardware preset manager instructions.

More Chase Bliss Pedals on Nitelite