Chase Bliss Wombtone MKII — MIDI Editor & CC Reference

Control the Chase Bliss Wombtone MKII from your browser — full MIDI CC reference for 9 parameters, interactive editor, and AI-generated presets. Free, no install.

Nitelite gives the Wombtone MKII a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 6). Works free in Chrome, Edge, Opera, or Brave — no install required.

Knobs

ControlMIDI CCDescription
FEEDCC 14Feedback/resonance intensity. CW = syrupy/intense, CCW = subtle. Interactive with stage count. Controls ramp speed when ramping engaged.
VOLUMECC 15Effect level with internal voltage doubler and boost circuit for massive headroom.
MIXCC 16Dry to pure phase vibrato. Middle = classic phase chorusing.
RATECC 17Phase effect rate. MKII allows very slow rates. Overridden by tap tempo.
DEPTHCC 18Phase range/width. Clockwise for wide frequency spectrum sweep.
FORMCC 19Waveform asymmetry. CCW = quick up/slow down, CW = slow up/quick down, noon = symmetric.

Switches

SwitchMIDI CCPositions
WAVE LCC 21SINE / TRI / SQR
DIV/STGCC 211/2 / 1/4 / 1/8
WAVE RCC 21SQR / TRI / SINE

DIP Switches — RAMP/EXP

ControlMIDI CCDescription
VOLUMECC 61Enable ramping/expression control for VOLUME knob
MIXCC 62Enable ramping/expression control for MIX knob
RATECC 63Enable ramping/expression control for RATE knob
DEPTHCC 64Enable ramping/expression control for DEPTH knob
FORMCC 65Enable ramping/expression control for FORM knob
BOUNCECC 66Bounce: parameters modulate back and forth. Off: ramp and hold.
STAGESCC 67Enables stage selection on tap division toggle: 2, 4, or 6 phase stages
MoToBypCC 68Momentary-to-bypass: pedal only active while bypass stomp is held

DIP Switches — DIRECTION

ControlMIDI CCDescription
VOLUMECC 71VOLUME ramp direction: rise (CW) or fall (CCW)
MIXCC 72MIX ramp direction: rise (CW) or fall (CCW)
RATECC 73RATE ramp direction: rise (CW) or fall (CCW)
DEPTHCC 74DEPTH ramp direction: rise (CW) or fall (CCW)
FORMCC 75FORM ramp direction: rise (CW) or fall (CCW)
TAP CTRLCC 76R = tap sets ramp rate, P = tap sets Rate
TAP DIVCC 77Enables alternate tap division bank (3/6/8 instead of 1/2/4)
SWEEPCC 78Sweep direction for ramp/expression. T = knob to max, B = knob to min.

Footswitches

  • TAPbypass on CC 93
  • BYPASSbypass on CC 102

Special MIDI Functions

  • Tap Tempo — CC 93
  • Expression — CC 100
  • MIDI Clock Ignore — CC 51. When enabled, the pedal ignores incoming MIDI clock and uses its own internal rate. When disabled, RATE syncs to the MIDI clock tempo.
  • Ramp Speed — CC 20. Sets the ramp speed directly via MIDI — how fast the controlled parameter travels from one end of its range to the other when ramping is engaged.
  • MIDI Note Divisions — CC 21. Sets the tap/MIDI clock division: 0 = whole note, 1 = half note, 2 = quarter note triplet, 3 = quarter note, 4 = eighth note, 5 = sixteenth note.

Hardware Presets

The Wombtone MKII has 122 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.

More Chase Bliss Pedals on Nitelite