Chase Bliss Condor HiFi — MIDI Editor & CC Reference
Control the Chase Bliss Condor HiFi from your browser — full MIDI CC reference for 9 parameters, interactive editor, and AI-generated presets. Free, no install.
Nitelite gives the Condor HiFi a full browser-based control surface: turn every knob, flip every switch, describe the tone you want to the AI Tone Terminal, and save the results — all sent to the pedal live over MIDI (default channel 2). Works free in Chrome, Edge, Opera, or Brave — no install required.
Knobs
Control
MIDI CC
Description
GAIN
CC 14
Input signal amplification. When ramping engaged, controls ramp speed.
FREQ
CC 15
Selects frequency for MIDS boost/cut (~150 Hz to ~4 kHz)
VOLUME
CC 16
Overall output level
BASS
CC 17
Low frequency boost (+10 dB) / cut (-20 dB). Noon is neutral.
MIDS
CC 18
Mid frequency boost/cut up to 18 dB at FREQ selection. Noon is neutral.
LPF
CC 19
Low pass filter for emphasis and intensity
Switches
Switch
MIDI CC
Positions
BASS
CC 21
WIDE / MID / NARROW
MIDS
CC 22
MELLOW / MILD / HEAVY
LPF
CC 23
1 / 2 / 3
DIP Switches — RAMP / EXPRESSION
Control
MIDI CC
Description
GAIN
CC 61
Enable ramping/expression control for GAIN knob
FREQ
CC 62
Enable ramping/expression control for FREQ knob
BASS
CC 63
Enable ramping/expression control for BASS knob
MIDS
CC 64
Enable ramping/expression control for MIDS knob
LPF
CC 65
Enable ramping/expression control for LPF knob
BOUNCE
CC 66
Bounce mode (continuous LFO) vs Ramp (one-shot movement)
SWEEP
CC 67
Sweep direction: Bottom (B, knob=min) or Top (T, knob=max)
RESET
CC 68
HOLD function: Hold (H) = ramp active only while held, Reset (R) = ramp resets on press
DIP Switches — CUSTOMIZE
Control
MIDI CC
Description
GAIN
CC 71
Rise/Fall direction for GAIN ramping or expression
FREQ
CC 72
Rise/Fall direction for FREQ ramping or expression
BASS
CC 73
Rise/Fall direction for BASS ramping or expression
MIDS
CC 74
Rise/Fall direction for MIDS ramping or expression
LPF
CC 75
Rise/Fall direction for LPF ramping or expression
DRIVE
CC 76
HOLD function: Drive (D) = standard drive toggle, Hold (H) = hold for ramp control
BUFFER
CC 77
Enables high-quality buffered bypass
MOTOBYP
CC 78
Momentary-to-bypass: effect only engages when footswitch is held down
Footswitches
DRIVE — bypass on CC 103
BYPASS — bypass on CC 102
Special MIDI Functions
Expression — CC 100
Hardware Presets
The Condor HiFi has 122 hardware preset slots. Nitelite can save your current settings to a slot and recall slots via MIDI program change.